Product Design
Addition of Inorganic Acetates to Cellulose Filters Increases Nicotine/Tar Levels
Abstract
Notes previous studies find inorganic acetates added to filters significantly increases Nicotine/Tar levels. Presents materials and methods for further testing of acetates as filter additives and lists results of nicotine delivery and nicotine/CPM compared to the control.
Fields
- Notes
CPM can refer to Counts Per Minute when radioactive tracers are used in anaylsis
- Author
- Johnson,J.M.
- Recipient
- Ireland, M.S.
- Hypothesis
- Mainstream constituent yieldsModification of selected mainstream smoke constituents in response to health concerns.
- Nicotine transport, transfer, and uptake
Design changes which alter nicotine delivery or effect how the product causes and maintains dependence, including transfer of nicotine from tobacco to smoke, and uptake into the body.- Use of additives
Modification of tobacco products through use of additives and measuring effects on dependence, behavior, and toxicity.- Use of filters, paper, and ventilation
Modification of tobacco products through use of filters, paper, and ventilation, and measuring effects on dependence, behavior, and toxicity. - Nicotine transport, transfer, and uptake
- Keyword
- Nicotine delivery (Smoke nicotine or nicotine yield)
- Nicotine manipulation
- Additive
- Potassium acetate
- Magnesium acetate
- Sodium acetate
- Magnesium acetate
- Smoke Constituent
- Nicotine
- Carbon monoxide
- Design Component
- Cellulose acetate filter (CA filter, Conventional filter)
- Brand
- Golden Lights
- Subject
- nicotine technology
- Filters (Design)
- nicotine technology
- Tar (Measures)
- acids (additives)
- additives
- Puff Count (Measures)
- Filters (Design)
Document Images
MEMORANDUM
January 25, 1985
TO: M.S. Ireland
FROM: J.M. Johnson
SUBJECT: Addition of Inorganic Acetates to Cellulose Filters
Increases Nicotine/Tar Levels
In a previous study, addition of potassium acetate to cellulose
filters caused significant increases in nicotine and nicotine/CPM
levels (1). In a continuation of this work, magnesium and sodium
acetate have been evaluated as filter additives. Potassium
acetate was retested.
Experimental
Solutions at 0%, 1% and 5% w/v of each compound in ethanol or
ethanol:water were prepared. Baumgartner pure cellulose filter
rods were.cut into 54 mm sections and soaked in a solution for 5
minutes. They were then air dried for 4 hours and oven dried at
30°C for 3 days. The treated rods were cut to 25 mm lengths,
attached to Kent Golden Lights 100 tobacco rods, taped to elimi-
nate ventilation and submitted to the smoking lab for analysis.
Results are shown in Tables 1, 2 and 3.
Conclusion
Addition of inorganic acetates caused significant increases in
nicotine delivery (21% to 44%) and nicotine/CPM levels (18% to
41%) relative to the control. Only minor differences were noted
in puff count, P.D. and CO levels. For each compound, the more
inorganic acetate on the filter, the higher the nicotine and
nicotine/CPM levels. These results are consistent with those in
the previous study (1).
As a function of % w/w inorganic acetate/filter, the order of
efficiency for nicotine delivery and nicotine/CPM levels, from
highest to lowest, was magnesium acetate, sodium acetate and
potassium'acetate.
Reference
1. J.M. Johnson, "Evaluation of Potassium Acetate as a Cellulose rx
Filter Additive", Lorillard Memorandum, July 25, 1984. 1-A
/jw:1
~
N
N
J
M
Johnson -1
.
.
C~
Xc: J. W. Childers '-D. D. Fine
M. J. Minnemeyer . A. Sudholt

Table 1: Smoking Lab Results
Solution NIC
Used w/v (mg/cig) CPM
(mg/cig) DPM
(mg/cig) CO
(mg/cig) Puff
(/cig) P.D.
(mm/cig)
NIC/CPM
0% (Control) 0.71 9.9 10.7 17.3 7.8 151.1 0.0717
1% Mg Acetate 0.92 10.9 11.8 17.1 7.8 142.1 0.0844
5% Mg Acetate 1.00 11.0 12.0 17.4 7.8 143.7 0.0909
1% Na Acetate 0.87 9.7 10.6 15.9 8.1 137.8 0.0897
5% Na Acetate 0.96 10.2 11.1 16.9 7.9 139.3 0.0941
1% K Acetate 0.86 9.8 10.7 16.8 7.9 141.9 0.0878
5% K Acetate 1.02 10.1 11.1 17.3 7.6 148.8 0.1010
Results from 1st Test (1)
1% K Acetate 0.96 10.4 11.4 17.7 7.4 138 0.0923
5% K Acetate 1.09 10.4 11.5 17.3 7.3 151 0.1048
ZZtzzttR

Table 2: % Changes in Nicotine, CPM and Nicotine/CPM Levels Relative to
C the Control
Solution % Change
Used w/v
NIC
CPM
NIC/CPM
1% Mg Acetate +30% +10% +18%
5% Mg Acetate +41% +11% +27%
1% Na Acetate +23% - 2% +25%
5% Na Acetate +35% + 3% +31%
1% K Acetate +21% - 1% +22%
5% K Acetate +44% + 2% +41%
Results from 1st Test (1)
1% K Acetate
+28%
+ 7%
+19%
5% K Acetate +45% + 7% +36%

C Table 3: % w/w Inorganic Acetate/Filter
Solution Used Inorganic Acetate/Filter
$ w/v $ w/w
0% (Control) 0%
1% Magnesium acetate 0.2%
5% Magnesium acetate 6.5%
1% Sodium acetate 0.7%
5% Sodium acetate 8.5%
1% Potassium acetate 2.4%
5% Potassium acetate 18.8%
